Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSMERCURY2011MARINER PREMIER, 2.5 7, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1496 (MODULE CONFIGURATION)DIAGNOSIS AND TESTINGMODULE CONFIGURATIONDTC CHART

2011 Mercury Mariner Premier, 2.5 7, AWD

DTC Chart

2011 Mercury Mariner Premier, 2.5 7, AWDSECTION DTC Chart

WARNING: This page is about a different car, the 2011 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Some modules on this vehicle utilize a 5-character DTC followed by a 2-character failure-type code. The failure-type code provides information about specific fault conditions such as opens, or shorts to ground. Continuous memory DTCs have an additional 2-character DTC status code suffix to assist in determining DTC history.

DTC CHART

DTC	Description	Source	Action
B2477	Module Configuration Failure	ABS module (without Hybrid) Audio Control Module (ACM) (without navigation) HVAC module (without Hybrid) Front Display Interface Module (FDIM) Instrument Cluster (IC) Power Steering Control Module (PSCM) Smart Junction Box (SJB) (without Hybrid)	CARRY OUT Programmable Module Installation (PMI). REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
B2900	VIN Mismatch	ABS module (without Hybrid)	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
P0602	Powertrain Control Module Programming Error	PCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
P0605	Internal Control Module Read Only Memory (ROM ) Error	PCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
P1635	Tire/Axle Out of Acceptable Range	PCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
P1639	Vehicle ID Block Corrupted, Not Programmed	PCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U0300	Internal Control Module Software Incompatibility	Battery Control Module - High Voltage Traction Battery (BCM-HVTB) HVAC module (without Hybrid) PCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U0300: 00	Internal Control Module Software Incompatibility: No Sub Type Information	Restraints Control Module (RCM)	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U0300: 51	Internal Control Module Software Incompatibility: Not Programmed	ABS module (Hybrid)	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U201A: 51	Control Module Main Calibration Data: Not Programmed	ACM (with navigation) Front Controls Interface Module (FCIM)	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2050	No Application Present	4X4 control module ABS module (without Hybrid) ACM (without navigation) BCM-HVTB HVAC module (without Hybrid) FDIM IC Occupant Classification System Module (OCSM) SJB Transmission Control Module (TCM)	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2051	One or More Calibration Files Missing/Corrupt	4X4 control module ACM (without navigation) HVAC module (without Hybrid) FDIM OCSM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2100: 00	Initial Configuration Not Complete: No Sub Type Information	ACM (with navigation) ABS module (Hybrid) RCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2100: 00	Initial Configuration Not Complete: No Sub Type Information	Accessory Protocol Interface Module (APIM)	CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this service information.
U2100: 56	Initial Configuration Not Complete: Invalid/Incompatible Configuration	ABS module (Hybrid)	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2101: 00	Control Module Configuration Incompatible: No Sub Type Information	ACM (with navigation)	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2101: 00	Control Module Configuration Incompatible: No Sub Type Information	APIM	CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this service information.
U2200: 00	Control Module Configuration Memory Corrupt: No Sub Type Information	RCM	INSTALL a new RCM . REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U3000: 46	Control Module: Calibration/Parameter Memory Failure	RCM	INSTALL a new RCM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U3002: 62	Vehicle Identification Number: Signal Compare Failure	ABS module (Hybrid) RCM	CARRY OUT PMI . REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.