Blower Motor Speed Control: Notes

2010 Mercury Mariner Hybrid, AWDSECTION Notes
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Blower Motor Speed Control Replacement Components With Torque Specifications
GF0018896Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - RH cowl grille screw (2 required)
2 018A16 RH cowl grille
3 12B637 Vapor management valve (VMV) electrical connector
4 - VMV fitting (2 required) (part of 9C915)
5 N621927 VMV nut (3 required)
6 8287 Heater outlet hose clamp (2 required)
7 18472 Heater outlet hose
8 8287 Heater core inlet clamp
9 19C603 Blower motor speed control electrical connector
10 W704759 Blower motor speed control screw
11 W701795 Blower motor speed control nut
12 19E624 Blower motor speed control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.