Compressor Manifold and Tube Assembly - 2.3L: Notes

2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes
WARNING: This page is about a different car, the 2008 Mercury Milan, 2008 Lincoln MKZ, and 2008 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
PAG Refrigerant Compressor Oil (R-134a Systems)
YN-12-D
WSH-M1C231-B
Fig 1: Exploded View Of Compressor Manifold & Tube Assembly With Torque Specifications - 2.3L
GF0030337Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Coolant reservoir hose retainer (2 required)
2 W505422 Washer reservoir filler neck bolt
3 W520413 Compressor manifold and tube suction fitting nut
4 W520413 Condenser inlet fitting nut
5 W701625 Compressor manifold bolt
6 W500032 Secondary air injection pump bolt (3 required)
7 19D734 Compressor manifold and tube assembly
8 19B596 Gasket seal (4 required)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.