Combination switch, location/task/design/function - GF82.30-P-2100PQ

2006 Mercedes Benz C350 4MaticSECTION Combination switch, location/task/design/function - GF82.30-P-2100PQ

MODELS 203.0 /2 /7 as of 24.4.04 

Fig 1: Identifying Combination Switch - Models 203.0 /2 /7 As Of 24.4.04
G04735540
  Combination switch, location The combination switch (S4) is mounted on the steering column.  
  Combination switch, purpose The combination switch (S4) controls the following functions:
Turn signals, high and low beams, headlamp flasher, windshield wiper system and windshield washer system.
 
  Combination switch, design The combination switch (S4) contains the left and right turn signal switch group, headlamp flasher/high beam switch, low beam switch, windshield washer system switch and the wipe switch.  
  Combination switch, function Model 203.0 /7 GF82.30-P-2100-04PQ 
    Model 203.2 GF82.30-P-2100-04PS 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.