Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCEDES BENZ2006C350 4MATICREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTWIPER/WASHER SYSTEMSENTERTAINMENT/NAVIGATION, LIGHTING, WINDOWS -- 203 CHASSISBASIC KNOWLEDGECOMBINATION SWITCH, LOCATION/TASK/DESIGN/FUNCTION - GF82.30-P-2100PP
2006 Mercedes Benz C350 4Matic
Combination switch, location/task/design/function - GF82.30-P-2100PP
2006 Mercedes Benz C350 4MaticSECTION Combination switch, location/task/design/function - GF82.30-P-2100PP
MODEL 203.0 /2 /7 up to 23.4.04, 209.3 /4, 211.0 /2
Shown on Model 203.0
| Combination switch, location | The combination switch (S4) is mounted on the steering column. | ||
| Combination switch, purpose | The combination switch (S4) controls the following functions: Turn signal, high and low beam, headlamp flasher, windshield wiper, and windshield washer system. |
||
| Combination switch, design | The combination switch (S4) contains the left and right turn signal switch group, headlamp flasher switch/high beam switch, low beam switch, windshield washer system switch and the wipe switch. | ||
| Combination switch, function | MODEL 203, 209 | GF82.30-P-2100-04PP | |
| Model 211 | GF82.30-P-2100-04T |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.