Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Clock Spring Adjustment [Two-Step Deployment Control System]
2023 Mazda CX-5 SSECTION Clock Spring Adjustment [Two-Step Deployment Control System]
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Set the front wheels straight ahead.CAUTION:
- The clock spring will break if over-wound. Do not forcibly turn the clock spring.
- Turn the clock spring clockwise until it stops.
- Turn the clock spring counterclockwise approx. 2 turns .
- Align the mark on the clock spring with the mark on the outer housing.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.