Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2010CX-9 SPORT, 3.7 V, AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSON-BOARD DIAGNOSTIC [AUDIO]DIAGNOSTIC ASSIST FUNCTION [AUDIO]SWITCH INSPECTIONWITH DISPLAY
2010 Mazda CX-9 Sport, 3.7 V, AWD
With display
2010 Mazda CX-9 Sport, 3.7 V, AWDSECTION With display
- Turn the ignition switch to the ACC or ON position.
- Turn the audio unit power to ON.
- While pressing the POWER/VOLUME switch, simultaneously press the Selection switch 3 for 0.5 s or more .
- Inspect according to the following table:INSPECTION CHART
Inspection Display Action - Launch the switch inspection mode.
- Operate all of the switches (press).
- Does the buzzer sound?
- Yes The switch is normal. No Verify the switch.
(See CONFIRMATION STEP 1: AUDIO PANEL SWITCH CONFIRMATION [ENTIRE AUDIO SYSTEM] .) - Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.