Front Door Quarter Glass Removal/Installation

2010 Mazda 5 Sport, 2.3 L, StandardSECTION Front Door Quarter Glass Removal/Installation
WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully open the front door glass.
  2. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  3. Disconnect the negative battery cable.
  4. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  5. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  6. Remove the bolts and screw.
  7. Remove the front door glass guide and glass run channel as a single unit.
    Fig 1: Front Door Glass Guide, Glass Remove / Install Replacement Components With Torque Specifications
    G05545655Courtesy of MAZDA MOTORS CORP.
  8. Remove the front door quarter glass.
  9. Install in the reverse order of removal.
    Fig 2: Identifying Front Door Quarter Glass
    G05545656Courtesy of MAZDA MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.