SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20086 S SPORT, 4D HATCHBACK, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 672 (GLASS/WINDOWS/MIRRORS)WINDSHIELD REMOVALNOTES
2008 Mazda 6 s Sport, 4D Hatchback, Standard

Windshield Removal: Notes

2008 Mazda 6 s Sport, 4D Hatchback, StandardSECTION Notes
WARNING: This page is about a different car, the 2008 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the following parts:
    1. Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION. )
    2. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION .)
    3. Rearview mirror (See REARVIEW MIRROR REMOVAL/INSTALLATION .)
    4. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION .)
    5. Sunvisor (See SUNVISOR REMOVAL/INSTALLATION .)
    6. Map light (See MAP LIGHT REMOVAL/INSTALLATION .)
  2. Set the headliner out of the way.
  3. Apply protective tape along the edge of the body.
  4. Apply protective tape to the dashboard to protect it from damage.
  5. Cut the windshield molding lip using a razor.
    WARNING:
    • Using a razor with bare hands can cause injury. Always wear gloves when using a razor. 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.