Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA1991MX-6 GT, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEM - LATEADJUSTMENTSPARKING/EMERGENCY BRAKE
1991 Mazda MX-6 GT, Standard
Parking/Emergency Brake
1991 Mazda MX-6 GT, StandardSECTION Parking/Emergency Brake
- Parking brake lever stroke should be 5-7 notches with a pull force of 22 lbs. (10 kg). If parking brake needs to be adjusted, start engine. Depress brake pedal several times. Turn engine off.
- Remove adjusting nut clip and turn adjusting nut at front of parking brake cable. See Fig 1 . After adjusting, turn ignition on. Pull parking brake lever one notch and ensure parking brake warning light illuminates. Release parking brake and ensure rear brakes do not drag.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.