DTC Information: DTC Detecting Condition

2021 Kia Sedona EXSECTION DTC Detecting Condition
Item Detecting Condition Possible Cause
DTC Strategy
  • Electrical Monitoring
  • Poor Connector Connection
  • Short to ground
  • Faulty Downstream O2 Sensor
Enable Conditions
  • Engine speed during engine start higher than 32 RPM
  • Battery voltage at between 10V and 16V
  • Power stage command "OFF"
Threshold Value
  • ECU power stage diagnosis downstream O2 sensor output voltage is lower than 1.911V
Diagnostic Time
  • Continuous
MIL ON Condition
  • 2 driving cycles
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.