Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2008COMPASS LIMITED, AWD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALGAUGESINSTRUMENT CLUSTER (SERVICE INFORMATION)INSTRUMENT CLUSTER - SERVICE INFORMATIONDISASSEMBLYINSTRUMENT CLUSTERCLUSTER HOOD AND MASK
2008 Jeep Compass Limited, AWD, Standard
Cluster Hood And Mask
2008 Jeep Compass Limited, AWD, StandardSECTION Cluster Hood And Mask
- Disconnect and isolate the battery negative cable.
- Remove the instrument cluster from the instrument panel. See REMOVAL .
- Remove the cluster lens (3) from the face of the cluster hood and mask unit (2). Refer to CLUSTER LENS .
- Working around the perimeter of the cluster, disengage each of the six integral latch features that secure the cluster hood and mask unit to the cluster housing (1).
- Remove the hood and mask unit from the face of the instrument cluster.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.