Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2008COMPASS LIMITED, AWD, STANDARDREPAIR AND DIAGNOSISELECTRICALGAUGESINSTRUMENT CLUSTER (SERVICE INFORMATION)INSTRUMENT CLUSTER - SERVICE INFORMATIONDISASSEMBLYINSTRUMENT CLUSTERCLUSTER LENS
2008 Jeep Compass Limited, AWD, Standard
Cluster Lens
2008 Jeep Compass Limited, AWD, StandardSECTION Cluster Lens
- Disconnect and isolate the battery negative cable.
- Remove the instrument cluster from the instrument panel. See REMOVAL .
- Working around the perimeter of the cluster, disengage each of the nine integral latch features that secure the cluster lens (3) to the cluster hood and mask unit (2) and to the cluster housing (1).
- Remove the lens from the face of the cluster hood and mask unit.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.