DTC Chart Test Description

1996 Isuzu Trooper S, AutomaticSECTION DTC Chart Test Description
WARNING: This page is about a different car, the 1995 Isuzu Trooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Numbers below refer to step numbers on the diagnostic chart.
  1. This test determines whether the malfunction is due to a high resistance or open in the "DIAGNOSTIC CODES REQUEST" circuit between the DERM and ground.
  2. This test determines whether the malfunction is due to a high resistance or open in the "DIAGNOSTIC CODES REQUEST" circuit between the DERM and ground.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.