Quick Lookups: Fluids

1985 Isuzu I-Mark 2D Hatchback, StandardSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Automatic Transmission Fluid 1.5L Eng 6.30 QTS. 5.96 L Automatic Transmission Fluid DEXRON II S
Engine Coolant 1.5L Eng 6.80 QTS. 6.43 L 50/50 mixture of good quality ethylene-glycol antifreeze & water. S
Engine Oil 1.5L Eng 3.40 QTS. 3.21 L SAE 5W-20 (Below 20Deg.F), 5W-30 (Below 60Deg.F), 10W-30/40 (Above 0Deg.F), 20W-20/40/50 (Above 20Deg.F), 30 (Above 40Deg.F). S
Engine Oil 1.5L Eng w/o Filter 3.00 QTS. 2.83 L SAE 5W-20 (Below 20Deg.F), 5W-30 (Below 60Deg.F), 10W-30/40 (Above 0Deg.F), 20W-20/40/50 (Above 20Deg.F), 30 (Above 40Deg.F). S
Fuel Tank 1.5L Eng 11.00 GALS. 41.63 L S
Manual Transmission Fluid 1.5L Eng 2.80 QTS. 2.64 L SAE 5W-30SF S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.