Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Isuzu: 1985
1985 IsuzuSECTION 1985
- I-Mark
- Impulse
- Pickup
- Trooper II
- I-Mark
- Impulse
- Pickup
- Base, 1.9 A, 4WD, MSG4ET
- Base, 1.9 A, 4WD, MSG5L
- Base, 1.9 A, RWD, Automatic
- Base, 1.9 A, RWD, Standard, MSG4K
- Base, 1.9 A, RWD, Standard, MSG5K
- Base, 2.2 S, 4WD
- Base, 2.2 S, RWD, Automatic
- Base, 2.2 S, RWD, Standard, MSG4K
- Base, 2.2 S, RWD, Standard, MSG5K
- Base, 2.2 U, 4WD
- Base, 2.2 U, RWD, Automatic
- Base, 2.2 U, RWD, Standard, MSG4K
- Base, 2.2 U, RWD, Standard, MSG5K
- LS, 1.9 A, 4WD
- LS, 1.9 A, RWD, Automatic
- LS, 1.9 A, RWD, Standard, MSG4K
- LS, 1.9 A, RWD, Standard, MSG5K
- LS, 2.2 S, 4WD
- LS, 2.2 S, RWD, Automatic
- LS, 2.2 S, RWD, Standard, MSG4K
- LS, 2.2 S, RWD, Standard, MSG5K
- LS, 2.2 U, 4WD
- LS, 2.2 U, RWD, Automatic
- LS, 2.2 U, RWD, Standard, MSG4K
- LS, 2.2 U, RWD, Standard, MSG5K
- Trooper II
Database: CHARM
CHARM manuals were retrieved from a set of DVDs released in late 2013. These manuals are usually the most detailed for the years in which they're available, but occasionally have missing or cut-off images.
Database: LEMON
LEMON manuals were retrieved in late 2025, so they have more up to date technical bulletins for example. However, they tend to be less detailed for older vehicles.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.