Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISELECTRICALGAUGESDRIVER INFORMATION SYSTEMCOMBINATION METERSODO/TRIP METER AND ILLUMINATION CONTROL SWITCH INSPECTION
2006 Infiniti FX35 AWD
ODO/Trip Meter and Illumination Control Switch Inspection
2006 Infiniti FX35 AWDSECTION ODO/Trip Meter and Illumination Control Switch Inspection
Symptom: Illumination control does not operate.
- CHECK ODO/TRIP METER AND ILLUMINATION CONTROL SWITCH
- Remove ODO/trip meter and illumination control switch. Refer to "REMOVAL AND INSTALLATION OF ODO/TRIP METER AND ILLUMINATION CONTROL SWITCH ".
- Check continuity ODO/trip meter and illumination control switch. Refer to "ODO/TRIP METER AND ILLUMINATION CONTROL SWITCH ".
OK or NG
OK : Replace combination meter.
NG : Replace ODO/trip meter and illumination control switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.