Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
ODO/Trip Meter And Illumination Control Switch
2006 Infiniti FX35 AWDSECTION ODO/Trip Meter And Illumination Control Switch
Check continuity between terminals 25, 26, 35 or 36 and 27.
TERMINALS REFERENCE VALUE CHART
| Terminal | Condition | Continuity | |
|---|---|---|---|
| 25 | 27 | Illumination control switch (-) is pressed. | Yes |
| Illumination control switch (-) is released. | No | ||
| 26 | Illumination control switch (+) is pressed. | Yes | |
| Illumination control switch (+) is released. | No | ||
| 35 | Trip transfer switch is pressed. | Yes | |
| Trip transfer switch is released. | No | ||
| 36 | Trip reset switch is pressed. | Yes | |
| Trip reset switch is released. | No | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.