Terminals and Reference Value for IPDM E/R

2006 Infiniti FX35 AWDSECTION Terminals and Reference Value for IPDM E/R
IPDM E/R CONNECTOR TERMINAL VOLTAGE SPECIFICATIONS

Terminal Wire color Item Signal Input/output Condition Voltage (V) (Approx.)
20 LG Headlamp low (RH) Output Lighting switch 2ND position ON --> OFF Battery voltage --> 0
27 BR Headlamp high (RH) Output Lighting switch HIGH or PASS position ON --> OFF Battery voltage --> 0
28 SB Headlamp high (LH) Output Lighting switch HIGH or PASS position ON --> OFF Battery voltage --> 0
30 GY Headlamp low (LH) Output Lighting switch 2ND position ON --> OFF Battery voltage --> 0
38 B Ground (power) - - 0
48 L CAN-H Input/Output - -
49 R CAN-L Input/Output - -
51 SB Horn relay control signal Output Panic alarm is operating 0
Other than above Battery voltage
56 LG Hood switch signal Input ON (Open) --> OFF (closed) 0 --> Battery voltage
60 B Ground (signal) - - 0
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.