SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2006FX35 AWDREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR BODY PANELSBODY, LOCK & SECURITY SYSTEMINTELLIGENT KEY SYSTEMCHECK IPDM E/R OPERATION
2006 Infiniti FX35 AWD

Check IPDM E/R Operation

2006 Infiniti FX35 AWDSECTION Check IPDM E/R Operation
  1. CHECK IPDM E/R INPUT VOLTAGE 

    Check voltage between IPDM E/R connector E9 terminal 51 (SB) and ground.

    51 (SB) - Ground : Battery voltage 

    OK or NG 

    OK : Replace IPDM E/R.

    NG : GO TO 2.

    Fig 1: Identifying Voltage Between IPDM E/R Connector E9 Terminal 51 (SB) And Ground
    G04077091Courtesy of NISSAN MOTOR CO., U.S.A.
  2. CHECK IPDM E/R HARNESS 
    1. Turn ignition switch OFF.
    2. Disconnect IPDM E/R and horn relay connector.
    3. Check continuity between IPDM E/R connector E9 terminal 51 (SB) and horn relay connector E10 terminal 1 (SB).

      51 (SB) - 1 (SB) : Continuity should exist. 

    OK or NG 

    OK : Check harness connection.

    NG : Repair or replace harness.

    Fig 2: Identifying Continuity Between IPDM E/R Connector E9 Terminal 51 And Horn Relay Connector E10 Terminal 1
    G04077092Courtesy of NISSAN MOTOR CO., U.S.A.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.