Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
MAIN SIGNALS Display Item
2006 Infiniti FX35 AWDSECTION MAIN SIGNALS Display Item
DATA MONITOR DESCRIPTION
| Monitor item [OPERATION] | Description | |
|---|---|---|
| PUSH SWITCH | [ON/OFF] | Displays status (Ignition knob switch ON/ignition knob switch OFF) as judged from ignition knob switch signal. |
| KEY SW | [ON/OFF] | Displays status (Key inserted: ON/Key removed: OFF) as judged by key switch. |
| DR REQ SW | [ON/OFF] | Displays status (Operable: ON/Non-operable: OFF) as judged from door request switch (driver side) signal. |
| AS REQ SW | [ON/OFF] | Displays status (Operable: ON/Non-operable: OFF) as judged from door request switch (passenger side) signal. |
| BD/TR REQ SW | [ON/OFF] | Displays status (Operable: ON/Non-operable: OFF) as judged from door request switch (back door) signal. |
| IGN SW | [ON/OFF] | Displays status (Ignition knob ON position: ON/Ignition knob OFF position: OFF) as judged from ignition switch signal. |
| ACC SW | [ON/OFF] | Displays status (Ignition switch ACC position: ON/Ignition switch OFF position: OFF) as judged from ignition switch signal. |
| DOOR STAT SW | [ON/OFF] | Displays status from door unlock sensor ON/OFF condition. |
| STOP LAMP SW | [ON/OFF] | Displays status (Brake pedal depress: ON/brake pedal not depress: OFF) as judged from stop lamp switch signal. |
| P RANGE SW | [ON/OFF] | Displays status from park/neutral position switch ON/OFF condition. |
| BD OPEN SW | [ON/OFF] | Displays status (Back door open: ON/Back door closed: OFF) as judged from back door opener switch signal. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.