DTC Information and Inspection: DTC Detecting Condition

2022 Hyundai Santa Cruz SEL, FWDSECTION DTC Detecting Condition
Item Detecting Condition Possible Cause
DTC Strategy
  • Voltage monitoring
  1. Poor connector connection
  2. Short to battery or open in IAT signal circuit
  3. Faulty IAT sensor
Enable Condition
  • Battery voltage is between 10V and 16V
Threshold Value
  • IAT voltage is greater than 4.9V
  • Short to battery
Diagnostic Time
  • Continuous
MIL ON Condition
  • 2 driving cycles
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.