Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2009TUCSON LIMITED, 2.0 BREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISDTC TROUBLESHOOTING PROCEDURES (2.0L)TROUBLESHOOTING FOR DTCP0505 IDLE AIR CONTROL SYSTEMSPECIFICATION
2009 Hyundai Tucson Limited, 2.0 B
P0505 Idle Air Control System: Specification
2009 Hyundai Tucson Limited, 2.0 BSECTION Specification
TPS
THROTTLE POSITION CHART
| Throttle Position | Output Voltage |
|---|---|
| C.T (IDLE) | 0.2 ~ 0.8V |
| W.O.T | 4.3~ 4.8 V |
ICA COIL #1 (OPEN)
TEMPERATURE SPECIFICATION
| Temp.(°C) | Temp.(°F) | ICA Coil #1 (OPEN) (Ω) | Temp.(°C) | Temp.(°F) | ICA Coil #1 (OPEN) (Ω) |
|---|---|---|---|---|---|
| -20 | -4 | 9.2 ~ 10.8 | 40 | 104 | 12.0 ~ 13.6 |
| -10 | 14 | 9.7 ~ 11.3 | 50 | 122 | 12.4 ~ 14.0 |
| 0 | 32 | 10.2 ~ 11.8 | 60 | 140 | 12.9 ~ 14.5 |
| 10 | 50 | 10.6 ~ 12.2 | 70 | 158 | 13.4 ~ 15.0 |
| 20 | 68 | 11.1 ~ 12.7 | 80 | 176 | 13.8 ~ 15.4 |
| 30 | 86 | 11.5 ~ 13.1 | 100 | 212 | 14.7 ~ 16.3 |
ICA COIL #2 (CLOSE)
TEMPERATURE SPECIFICATION
| Temp.(°C) | Temp.(°F) | ICA Coil #2 (CLOSE) (Ω) | Temp.(°C) | Temp.(°F) | ICA Coil #2 (CLOSE) (Ω) |
|---|---|---|---|---|---|
| -20 | -4 | 12.1 ~ 13.7 | 40 | 104 | 15.7 ~ 17.3 |
| -10 | 14 | 12.8 ~ 14.4 | 50 | 122 | 16.3 ~ 17.9 |
| 0 | 32 | 13.4 ~ 15.0 | 60 | 140 | 16.9 ~ 18.5 |
| 10 | 50 | 14.0 ~ 15.6 | 70 | 158 | 17.4 ~ 19.0 |
| 20 | 68 | 14.5 ~ 16.1 | 80 | 176 | 18.0 ~ 19.6 |
| 30 | 86 | 15.1 ~ 16.7 | 100 | 212 | 19.2 ~ 20.8 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.