Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
P0076 Intake Valve Control Solenoid Circuit Low (Bank 1): Specification
2009 Hyundai Tucson Limited, 2.0 BSECTION Specification
RESISTANCE REFERENCE
| Intake valve control solenoid | Normal Parameter |
|---|---|
| Insulation Resistance(Ω) | above 50 MΩ |
TEMPERATURE AND RESISTANCE SPECIFICATION
| Temp.(°C) | Temp.(°F) | Resistance(Ω) | Temp.(°C) | Temp.(°F) | Resistance(Ω) |
|---|---|---|---|---|---|
| 0 | 32 | 6.2 ~ 7.4 | 60 | 140 | 8.0 ~ 9.2 |
| 10 | 50 | 6.5 ~ 7.7 | 70 | 158 | 8.3 ~ 9.5 |
| 20 | 68 | 6.8 ~ 8.0 | 80 | 176 | 8.6 ~ 9.8 |
| 30 | 86 | 7.1 ~ 8.3 | 90 | 194 | 8.9 ~ 10.1 |
| 40 | 104 | 7.4 ~ 8.6 | 100 | 212 | 9.2 ~ 10.4 |
| 50 | 122 | 7.7 ~ 8.9 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.