Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2005SANTA FE GLS, 2.7 D, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 4 (ENGINE CONTROL SYSTEM DIAGNOSIS (3.5L) (1 OF 2))DTC TROUBLESHOOTING PROCEDURESDTC P0205: INJECTOR CIRCUIT/OPEN-CYLINDER 5DTC DESCRIPTION
2005 Hyundai Santa Fe GLS, 2.7 D, AWD
DTC Description
2005 Hyundai Santa Fe GLS, 2.7 D, AWDSECTION DTC Description
WARNING: This page is about a different variant/trim than selected.
If the voltage of injector #5 is lower than the standard value, the PCM determines that a fault exists and a DTC is stored.
DTC DESCRIPTION
| Item | Detecting Condition | Possible cause |
|---|---|---|
| DTC Strategy |
|
|
| Enable Conditions | ||
| Threshold value |
|
|
| Diagnosis Time |
|
|
| MIL On Condition |
|
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.