Pressure Control Valve A, B: Overview

2003 Hyundai Accent BaseSECTION Overview
WARNING: This page is about a different variant/trim than selected.

Pressure control valve A, B regulate the pressure supplied to each clutch under the control of the pressure control solenoid valve A, B to eliminate shock at the time of shifting.

(1) pressure control valve A - Not operated

Fig 1: Pressure Control Valve A - Not Operated
G00963614Courtesy of HYUNDAI MOTOR CO.


(1) Pressure control valve A - Operation

Fig 1: Pressure Control Valve A - Operation
G00963615Courtesy of HYUNDAI MOTOR CO.


(2) Pressure control valve B - Not Operated

Fig 1: Pressure Control Valve B - Not Operated
G00963616Courtesy of HYUNDAI MOTOR CO.


(2) Pressure control valve B - Operation

Fig 1: Pressure Control Valve B - Not Operated
G00963617Courtesy of HYUNDAI MOTOR CO.

The main function of this valve controls the rear clutch independently.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.