SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2009CANYON 4D PICKUP, 2.9 9REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 73 (ENGINE COOLING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2009 GMC Canyon 4D Pickup, 2.9 9

Fastener Tightening Specifications

2009 GMC Canyon 4D Pickup, 2.9 9SECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Air Conditioning (A/C) Condenser to Radiator Bolt 28 N.m 21 lb ft
Coolant Heater 50 N.m 37 lb ft
Coolant Recovery Reservoir Bolt (at Wheelhouse Panel) 12 N.m 106 lb in
Coolant Recovery Reservoir Bolt (to Bracket) 10 N.m 89 lb in
Fan Blade Bolt 27 N.m 20 lb ft
Fan Clutch Nut 56 N.m 41 lb ft
Radiator Mounting Bracket Bolt 28 N.m 21 lb ft
Thermostat Housing Bolt 10 N.m 89 lb in
Water Outlet Housing Bolt 10 N.m 89 lb in
Water Pump Bolt 10 N.m 89 lb in
Water Pump Pulley Bolt 25 N.m 18 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.