Test Procedure

2022 Ford Transit Connect Titanium, GasSECTION Test Procedure
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2019 Ford Transit-350 HD, 2019 Ford Transit-350, 2019 Ford Transit-250, 2019 Ford Transit-150, and 2019 Ford F-550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. ME1 CHECK FOR DTCS 

    Are DTCs P0001, P0002, P0003, P0004, P0089, P0090, P0091 or P0092 present? 

    Yes No
    For F-650/F-750 and F-Series Super Duty, GO to  ME2.
    For all others, GO to  ME3.
    For F-Series Super Duty and F-650/F-750 with an engine no start concern, GO to  ME2.
    For symptoms without DTCs, GO to  ME2.
    For all others, RETURN to SYMPTOM CHARTS for further direction.
  2. ME2 CHECK THE VPWR VOLTAGE 
    NOTE: For a no start concern, follow the Yes answer.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.