Global Customer Symptom Code (GCSC) Chart

2021 Ford Edge SE, 4WDSECTION Global Customer Symptom Code (GCSC) Chart
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Global Customer Symptom Code Chart 

Customer Symptom Action
Start/Run/Move > Starting > Remote Start > Inoperative GO to Pinpoint Test R 
Safe and Secure > Latches/Locks > Door > Difficult to Close GO to Pinpoint Test A 
Safe and Secure > Latches/Locks > Door > Difficult to Open GO to Pinpoint Test A 
Safe and Secure > Latches/Locks > Door > Difficult to Open GO to Pinpoint Test B 
Safe and Secure > Latches/Locks > Door > Difficult to Open GO to Pinpoint Test C 
Safe and Secure > Latches/Locks > Door > Loose/Attachment GO to Pinpoint Test F 
Safe and Secure > Latches/Locks > Door > Manual Function GO to Pinpoint Test G 
Safe and Secure > Latches/Locks > Door > Manual Function GO to Pinpoint Test H 
Safe and Secure > Latches/Locks > Door > Power Function GO to Pinpoint Test I 
Safe and Secure > Latches/Locks > Door > Power Function GO to Pinpoint Test K 
Safe and Secure > Latches/Locks > Door > Power Function GO to Pinpoint Test L 
Safe and Secure > Latches/Locks > Door > Power Function GO to Pinpoint Test N 
Safe and Secure > Latches/Locks > Door > Sticks/Binds GO to Pinpoint Test D 
Safe and Secure > Latches/Locks > Door > Sticks/Binds GO to Pinpoint Test E 
Safe and Secure > Latches/Locks > Tailgate > Difficult to Open GO to Pinpoint Test M 
Safe and Secure > Latches/Locks > Tailgate > Manual Function GO to Pinpoint Test AD 
Safe and Secure > Latches/Locks > Fuel Door > Difficult to Close GO to Pinpoint Test AI 
Safe and Secure > Latches/Locks > Fuel Door > Difficult to Open GO to Pinpoint Test AH 
Safe and Secure > Remote Entry > Control > Inoperative GO to Pinpoint Test O 
Safe and Secure > Remote Entry > Control > Inoperative GO to Pinpoint Test P 
Safe and Secure > Remote Entry > Control > Inoperative GO to Pinpoint Test S 
Safe and Secure > Remote Entry > Control > Inoperative GO to Pinpoint Test T 
Safe and Secure > Remote Entry > Performance > Inoperative GO to Pinpoint Test Q 
Safe and Secure > Remote Entry > Performance > Inoperative GO to Pinpoint Test AK 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.