Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Electric Vehicle Mode
For plug in vehicles, the electric vehicle mode is a driver selectable switch that determines the operator request for one of three driving modes of operation. The three types of modes are:
- AUTO
- EV Now
- EV Later
The AUTO mode is normal operation of the system which minimizes the use of the gasoline engine until the battery charge is sufficiently depleted and requires recharging. The EV now mode disables the gasoline engine during most driving conditions when permitted by the high voltage traction battery. The EV later mode disables the electric-only drive system and prioritizes the gasoline engine to drive the vehicle to sustain the battery charge. The electric vehicle mode does not change with ignition key cycles. If the plug in energy is depleted or a system fault is detected, the vehicle system controller will switch to AUTO mode to maintain battery charge and continue operation.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.