Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2018FUSION ENERGI TITANIUMREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROLS - DESCRIPTION & OPERATION (HYBRID)TRANSMISSION CONTROL MODULE (TCM) COMPREHENSIVE COMPONENT MONITOR (CCM)ECO MODE
2018 Ford Fusion Energi Titanium
ECO Mode
2018 Ford Fusion Energi TitaniumSECTION ECO Mode
The ECO mode is a selectable option that determines the operator request for reduced power consumption.
When the ECO mode is activated, the following occurs:
- The ECO indicator on the instrument cluster illuminates
- Engine speed and torque level changes are revised to save energy
- Accelerator pedal response is reduced
- Regenerative braking response increases
- Cruise control system lowers acceleration rate
- Climate control system operates at reduced levels
The ECO mode does not change with ignition key cycles.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.