Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Ford Escape Hybrid, FWDFACTORY OEM SERVICE PROCEDURE
DTC Index
- Active Park Assist DTCS
- Anti-Lock Brake System - Vehicle Dynamic System DTCS
- Anti-Theft DTCS
- Automatic Transaxle/Transmission DTCS
- Automatic Transaxle/Transmission External Controls DTCS
- Charging System
- Climate Control System DTCS
- Cruise Control System DTCS
- Driver Information System & Entertainment System DTCS
- Electric Compass DTCS
- Engine Controls - Powertrain DTCS
- Engine Cooling DTCS
- Exterior Lighting System DTCS
- Four Wheel Drive (4WD) Systems DTCS
- Fuel System DTCS
- Glass, Frames & Mechanisms DTCS
- Handles, Locks, Latches & Keyless Entry System DTCS
- High Voltage Converter/Inverter DTCS
- High Voltage Traction Battery DTCS
- Instrument Cluster Illumination & Instrument Panel Illumination DTCS
- Instrumentation System, Message Center & Warning Chimes DTCS
- Interior Lighting System DTCS
- Module Communications Network DTCS
- Module Configuration DTCS
- MULTIFUNCTION Electronic Module DTCS
- Parking Aid DTCS
- Seat System DTCS
- Starting System DTCS
- Steering Column Switches DTCS
- Steering System DTCS
- Supplemental Restraint System DTCS
- Tire And Wheels DTCS
- Wiper & Washer System DTCS
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.