2011 Ford Escape Hybrid, FWDFACTORY OEM SERVICE PROCEDURE

HVAC Module

HVAC MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Action
B1030:12 Left Front Seat Heater: Circuit Short to Battery Go to PINPOINT TEST C .
B1030:14 Left Front Seat Heater: Circuit Short to Ground or Open Go to PINPOINT TEST C .
B1032:12 Right Front Seat Heater: Circuit Short to Battery Go to PINPOINT TEST D .
B1032:14 Right Front Seat Heater: Circuit Short to Ground or Open Go to PINPOINT TEST D .
B12AB Drivers Heated Seat Relay Drive Circuit Shorted to Battery Voltage Go to PINPOINT TEST C .
B12AC Drivers Heated Seat Relay Drive Circuit Open or Shorted to Ground Go to PINPOINT TEST C .
B12AD Passenger Heated Seat Relay Drive Circuit Shorted to Battery Voltage Go to PINPOINT TEST D .
B12AE Passenger Heated Seat Relay Drive Circuit Open or Shorted to Ground Go to PINPOINT TEST D .
All Other DTCs - Refer to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULE article.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.