100000 MI or 160000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness, or drag if using Special Operating conditions D, O.
    Vehicle
      Recommended multi-point inspection
    Universal Joint, Drive/Propeller Shaft
      Inspect front axle and U-joints; lubricate if equipped with grease fittings (4WD vehicles).
    Steering and Suspension
      Inspect and lubricate steering linkage, ball joints, and U-joints (if equipped with grease fittings) if using Special Operating conditions T, D, O.
    Exhaust System
      Inspect exhaust system and heat shields.
    Drive Belt
      Inspect accessory drive belt(s).
    Cooling System
      Inspect engine cooling system for strength, and hoses.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
Replace
    Spark Plug
      Replace spark plugs if not using Special Operating condition.
    Oil Filter, Engine
      If using Special Operating conditions T, I, D, O, E.
    Fluid - M/T
      Change manual transmission fluid if using Special Operating conditions D, O.
    Fluid - Differential
      Change rear axle fluid (Dana axles only) if not using Special Operating condition.
    Engine Oil
      If using Special Operating conditions T, I, D, O, E.
    Coolant
      Change engine coolant.
    Cabin Air Filter / Purifier
      If using Special Operating Conditions D, I, O.
    Air Filter Element
      If using Special Operating Conditions D, I, O.
Rotate
    Tires
      Rotate tires, inspect tires for wear and measure tread depth if using Special Operating Conditions D, O.