Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2010FOCUS S, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1340 (SUPPLEMENTAL RESTRAINT SYSTEM)
2010 Ford Focus S, Standard
Section 1340 (Supplemental Restraint System)
2010 Ford Focus S, StandardSECTION Section 1340 (Supplemental Restraint System)
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS)
- Special Tool(s)
- Principles of Operation
- Notes
- Air Bag Warning Indicator
- Clockspring
- Driver Air Bag Module
- High Speed Controller Area Network (HS-CAN)
- Occupant Classification Sensor (OCS) System
- Belt Tension Sensor (BTS)
- Passenger Air Bag Module
- Restraints Control Module (RCM)
- Safety Belt Buckle Switches
- Safety Belt Buckle Pretensioners
- Safety Belt Retractors
- Safety Canopy® Modules
- Seat Track Position Sensor
- Secondary Air Bag Warning (Chime)
- Impact Sensors (Restraints Sensor)
- Seat Side Air Bag Modules
- Fault PIDs
- Inspection and Verification
- DTC Charts
- Symptom Chart
- Pinpoint Test - Restraints Control Module (RCM)
- Pinpoint Test A: The Air Bag Warning Indicator is Illuminated Continuously
- Pinpoint Test B: DTCs B0001:11, B0001:12, B0001:13 and B0001:1A
- Pinpoint Test C: DTCs B0002:11, B0002:12, B0002:13 and B0002:1A
- Pinpoint Test D: DTCs B0010:11, B0010:12, B0010:13 and B0010:1A
- Pinpoint Test E: DTCs B0011:11, B0011:12, B0011:13 and B0011:1A
- Pinpoint Test F: DTCs B0020:11, B0020:12, B0020:13 and B0020:1A
- Pinpoint Test G: DTCs B0021:11, B0021:12, B0021:13 and B0021:1A
- Pinpoint Test H: DTCs B0028:11, B0028:12, B0028:13 and B0028:1A
- Pinpoint Test I: DTCs B0029:11, B0029:12, B0029:13 and B0029:1A
- Pinpoint Test J: DTCs B0050:11, B0050:12, B0050:13 and B0050:1D
- Pinpoint Test K: DTCs B0052:11, B0052:12, B0052:13 and B0052:1D
- Pinpoint Test L: DTC B0090:11 or B0090:93
- Pinpoint Test M: DTCs B0091:11, B0091:93, B0097:11 and B0097:93
- Pinpoint Test N: DTCs B0092:11, B0092:93, B0096:11 and B0096:93
- Pinpoint Test O: DTC B0095:11 or B0095:93
- Pinpoint Test R: DTCs B00A0:09, B00A0:4A, B00A0:63, B00A0:64 and B00A0:68
- Pinpoint Test S: DTCs B00B5:11, B00B5:12, B00B5:13 and B00B5:1D
- Pinpoint Test T: DTCs B00D5:11, B00D5:12 and B00D5:13
- Pinpoint Test U: DTCs B1211:11, B1211:12, B1211:13 and B1211:1A
- Pinpoint Test V: DTCs B1212:11, B1212:12, B1212:13 and B1212:1A
- Pinpoint Test W: DTCs B1213:11, B1213:12, B1213:13 and B1213:1A
- Pinpoint Test X: DTCs B1214:11, B1214:12, B1214:13 and B1214:1A
- Pinpoint Test Y: DTCs B1317, B1318, U3003:16 and U3003:17
- Pinpoint Test Z: DTCs B0001:2B, B0002:2B, B0010:2B, B0011:2B, B0020:2B, B0021:2B, B0028:2B, B0029:2B, B0050:2B, B0052:2B, B00B5:2B, B1211:2B, B1212:2B, B1213:2B and B1214:2B
- Pinpoint Test AA: DTCs B0001:4A, B0002:4A, B0010:4A, B0011:4A, B0020:4A, B0021:4A, B0028:4A, B0029:4A, B0050:4A, B0052:4A, B0090:4A, B0091:4A, B0092:4A, B0095:4A, B0096:4A, B0097:4A, B00B5:4A, B00D5:4A, B1211:4A, B1212:4A, B1213:4A, B1214:4A and U3000:4A
- Pinpoint Test AB: DTCs U0028:08 and U0028:88
- Pinpoint Test - Occupant Classification System Module (OCSM)
- Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS)
- General Procedures
- Supplemental Restraint System (SRS) Depowering and Repowering
- Supplemental Restraint System (SRS) Deactivation and Reactivation
- Inspection and Repair After a Supplemental Restraint System (SRS) Deployment
- Pyrotechnic Device Disposal
- Disposal of Deployable Devices and Pyrotechnic Devices That are Undeployed/Inoperative
- Disposal of Deployable Devices and Pyrotechnic Devices That Are Deployed
- Disposal of Deployable Devices and Pyrotechnic Devices That Require Manual Deployment
- Driver Air Bag Module, Passenger Air Bag Module and Seat Side Air Bag Modules - Remote Deployment
- Safety Belt Buckle Pretensioners, Safety Belt Retractor Pretensioners and Adaptive Load Limiting Safety Belt Retractors - Remote Deployment
- Safety Belt Buckle Pretensioners, Safety Belt Retractor Pretensioners and Load Limiting Safety Belt Retractors - In-Vehicle Deployment
- Safety Canopy® Modules and Side Air Curtain Modules - In-Vehicle Deployment
- Deployable Steering Column - In-Vehicle Deployment
- Rivet Nut Replacement
- Removal And Installation
- Air Bag Trim Cover - Passenger
- Clockspring
- Driver Air Bag Module
- Front Impact Severity Sensor
- Occupant Classification Sensor - Original Equipment
- Occupant Classification Sensor - Service Kit
- Passenger Air Bag Deactivation (PAD) Indicator
- Passenger Air Bag Module
- Restraints Control Module (RCM)
- Safety Canopy Module
- Seat Position Sensor
- Side Air Bag Module
- Side Impact Sensor - First Row, B-Pillar
- Side Impact Sensor - Second Row, C-Pillar
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.