Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009EDGE SPORT, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1560 (AUTOMATIC TRANSMISSION)DESCRIPTION AND OPERATIONHYDRAULIC SYSTEMMAIN CONTROL
2009 Ford Edge Sport, FWD
Main Control
2009 Ford Edge Sport, FWDSECTION Main Control
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
For component location, refer to Transmission .
- The main control assembly and related components are part of the pressure side of the hydraulic system.
- The main control assembly consists of the solenoids, the valve body assembly and the separator plate.
- These components combine to convert electrical signals into hydraulic actions.
- All valves in the main control assembly are an iodized aluminum and cannot be sanded, filed or dressed in any other way. If there is any damage to the valves that prevents or restricts their movement, install a new main control assembly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.