Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2009EDGE SPORT, FWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1560 (AUTOMATIC TRANSMISSION)DESCRIPTION AND OPERATIONAPPLY COMPONENTSBAND - OVERDRIVE
2009 Ford Edge Sport, FWD
Band - Overdrive
2009 Ford Edge Sport, FWDSECTION Band - Overdrive
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
For component location, refer to Transmission .
During 2nd and 5th gear operation, hydraulic pressure is applied to the overdrive servo.
- This pressure causes the piston to move and apply force to the band.
- This action causes the overdrive band to hold the overdrive drum.
- This causes the overdrive sun gear to be held stationary through the adapter plate and the overdrive drum.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.