Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FUSION SEL, 2.3 Z, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1190 (AUTOMATIC TRANSAXLE - 6F35)SPECIFICATIONSLINE PRESSURE CHART
2007 Ford Fusion SEL, 2.3 Z, Standard
Line Pressure Chart
2007 Ford Fusion SEL, 2.3 Z, StandardSECTION Line Pressure Chart
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
LINE PRESSURE CHART
| Gear | Line | ||
|---|---|---|---|
| Pressures at Idle(1) | |||
| P | 338-379 kPa (49-55 psi) | ||
| R | 621-689 kPa (90-100 psi) | ||
| N | 338-379 kPa (49-55 psi) | ||
| D | 338-379 kPa (49-55 psi) | ||
| L | 338-379 kPa (49-55 psi) | ||
| Pressure at Wide Open Throttle (WOT) Stall (1) | |||
| P | 338-379 kPa (49-55 psi) | ||
| R | 1,868-2,068 kPa (271-300 psi) | ||
| N | 338-379 kPa (49-55 psi) | ||
| D | 1,868-2,068 kPa (271-300 psi) | ||
| L | 1,868-2,068 kPa (271-300 psi) | ||
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.