Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FOCUS SES, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLVEHICLE DYNAMIC SYSTEMSREMOVAL AND INSTALLATIONHYDRAULIC CONTROL UNIT (HCU)NOTES
2007 Ford Focus SES, 4D Sedan, Standard
Hydraulic Control Unit (HCU): Notes
2007 Ford Focus SES, 4D Sedan, StandardSECTION Notes
Material
| Item | Specification |
|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 or PM-1-C (US); CPM-1 or CPM-1-C (Canada) |
ESA-M6C25-A or WSS-M6C62-A |
| High Temperature Nickel Anti-Seize Lubricant XL-2 (US); CXG-2-B (Canada) |
ESE-M12A4-A |
| Item | Part Number | Description |
|---|---|---|
| 1 | 2N051 | Brake tube fittings (6 required) |
| 2 | - | Anti-lock brake system (ABS) module electrical connector |
| 3 | W500011 | Hydraulic control unit (HCU)-to-bracket bolt (2 required) |
| 4 | W701014 | HCU bracket-to-body nut (3 required) |
| 5 | 2B389 | HCU bracket |
| 6 | 2C286 | HCU |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.