Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2007FOCUS SES, 4D SEDAN, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 347 (HVAC CONTROL SYSTEM)SPECIFICATIONSTORQUE SPECIFICATIONS
2007 Ford Focus SES, 4D Sedan, Standard
Torque Specifications
2007 Ford Focus SES, 4D Sedan, StandardSECTION Torque Specifications
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | N.m | lb-ft | lb-in |
|---|---|---|---|
| A/C compressor bolts (2.3L) | 25 | 18 | - |
| A/C compressor nut (3.0L) | 25 | 18 | - |
| A/C compressor bolts | 25 | 18 | - |
| A/C cycling switch | 3 | - | 27 |
| A/C clutch disc and hub bolt (2.3L and 3.0L) | 13 | 10 | - |
| A/C clutch disc and hub nut (Hybrid) | 26 | 19 | - |
| A/C condenser core fitting nuts | 8 | - | 71 |
| Auxiliary coolant flow pump bolts | 4 | - | 35 |
| Compressor inlet fitting bolt (2.3L) | 8 | - | 71 |
| Compressor outlet fitting bolt (2.3L) | 8 | - | 71 |
| Compressor manifold bolt (3.0L) | 20 | 15 | - |
| Compressor manifold bolt (Hybrid) | 21 | 15 | - |
| Compressor manifold and tube bracket nuts | 8 | - | 71 |
| Condenser core bracket bolts | 9 | - | 80 |
| Condenser core support bolts | 6 | - | 53 |
| Condenser-to-evaporator line bracket nut | 8 | - | 71 |
| Evaporator inlet line tube-O fitting nut | 24 | 18 | - |
| Front auxiliary evaporator inlet line front fitting nut | 8 | - | 71 |
| Front auxiliary evaporator outlet line fitting nut | 8 | - | 71 |
| Passenger zone valve fitting nuts | 17 | 13 | - |
| Passenger zone valve mounting nut | 8 | - | 71 |
| Suction accumulator-to-compressor line bracket nuts | 8 | - | 71 |
| Suction accumulator bracket nuts | 8 | - | 71 |
| Upper radiator mounting bracket bolt (Hybrid) | 9 | - | 80 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.