DTC P1489: PCV Heater Control Circuit

2005 Ford Pickup F250 Super Duty, 2D Pickup, 5.4 5, 4WD, AutomaticSECTION DTC P1489: PCV Heater Control Circuit
P1489 - PCV HEATER CONTROL CIRCUIT

Description:  This DTC sets when the powertrain control module (PCM) detects a positive crankcase ventilation (PCV) heater circuit failure.
Possible Causes: 
  • Open or shorted PCV circuit
  • Damaged PCV heater assembly
Diagnostic Aids:  Make sure the PCV valve is correct for the engine application and the PCV heater circuit is properly connected.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to HG: Positive Crankcase Ventilation (PCV) System STEP HG4.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.