Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004ECONOLINE E150, VAN CARGO, 4.6 WREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 303 (ANTI-LOCK BRAKE SYSTEM)DIAGNOSIS AND TESTINGANTI-LOCK CONTROLCONNECTOR CIRCUIT REFERENCESTABILITY ASSIST SWITCH C2114
2004 Ford Econoline E150, Van Cargo, 4.6 W
Stability Assist Switch C2114
2004 Ford Econoline E150, Van Cargo, 4.6 WSECTION Stability Assist Switch C2114
WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
C2114 CONNECTOR CIRCUIT DESCRIPTIONS
| Pin Number(s) | Circuit Designation/Description | Normal Condition/Measurement |
|---|---|---|
| 5 | 1205 (BK) Illumination ground | Less than 5 ohms between the switch and ground. |
| 9 | 1417 (LG/RD) Light emitting diode (LED) illumination | Less than 5 ohms between the switch and SJB. |
| 10 | 1412 (WH/PK) Traction control override | Less than 5 ohms between the switch and the instrument cluster. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.