SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004ECONOLINE E150, VAN CARGO, 4.6 WREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 290 (MODULE COMMUNICATIONS NETWORK)DIAGNOSIS AND TESTINGDRIVER SEAT MODULE (DSM)SYMPTOM CHARTDRIVER SEAT MODULE (DSM) C341C
2004 Ford Econoline E150, Van Cargo, 4.6 W

Driver Seat Module (DSM) C341c

2004 Ford Econoline E150, Van Cargo, 4.6 WSECTION Driver Seat Module (DSM) C341c
WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Driver Seat Module (DSM) C341c Connector Pins
G03203207Courtesy of FORD MOTOR CO.
DRIVER SEAT MODULE (DSM) C341C CONNECTOR PINS DESCRIPTION

Pin Number(s) Circuit Designation/Description Normal Condition/Measurement
2 91-AH80 (BN/WH) DSM ground. Less than 5 ohms between the DSM connector and ground.
10 29-AH80 (OG/WH) DSM power supply. 10 volts or greater at the DSM connector.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.