Principles of Operation

The anti-lock brake control module receives wheel speed readings from both front wheel speed sensors and the rear differential speed sensor, and processes this information, along with other sensor inputs, to determine if an ABS event is necessary. The wheel speed sensor electrically senses each tooth on the ABS sensor indicators as it passes through the wheel speed sensor's magnetic field.

The anti-lock brake control module continuously monitors and compares the rotational speed of each wheel speed sensor indicator and, when it detects an impending wheel lock, modulates brake pressure to the appropriate brake caliper(s). This is accomplished by triggering the hydraulic control unit (HCU) to open and close the appropriate solenoid valves. Once the affected wheel returns to normal speed, the ABS control module returns the solenoid valves to their normal position, and normal (base) braking resumes.

The ABS control module is self-monitoring. When the ignition switch is turned to the RUN position, the ABS control module will do a preliminary electrical check, and at approximately 20 km/h (12 mph), the pump motor is turned on for approximately one-half second. Any malfunction of the ABS system will cause the ABS to shut off; however, normal power assisted braking remains.