Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2004ECONOLINE E150, VAN CARGO, 4.6 WREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 146 (AUTOMATIC TRANSMISSION SERVICING)APPLICATION
2004 Ford Econoline E150, Van Cargo, 4.6 W
Section 146 (Automatic Transmission Servicing): Application
2004 Ford Econoline E150, Van Cargo, 4.6 WSECTION Application
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2003 Lincoln Navigator, 2003 Lincoln Blackwood, 2003 Ford RV Cutaway, 2003 Ford Pickup, and 2003 Ford F550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION APPLICATION
| Application | Transmission Model | ||
|---|---|---|---|
| Blackwood, Cab & Chassis, Cutaway, Excursion, Navigator & RV Cutaway | 4R100 | ||
| Econoline | |||
| E150 | 4R70W | ||
| E250 | |||
| 4.2L & 5.4L | 4R70W | ||
| 5.4L | 4R100 | ||
| E350 Super Duty | 4R100 | ||
| E450 Super Duty | 4R100 | ||
| E550 Super Duty | 4R100 | ||
| Expedition | |||
| 4.6L | 4R70W | ||
| 5.4L | 4R100 | ||
| Pickup | |||
| F150 | |||
| 4.2L, 4.6L & 5.4L | 4R70W | ||
| 5.4L | 4R100 | ||
| F250 Super Duty | 4R100 | ||
| F350 Super Duty | 4R100 | ||
| F450 Super Duty | 4R100 | ||
| F550 Super Duty | 4R100 | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.