Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Module, Global Telematics Box: Installation
2024 Dodge and Ram 1500 TRXSECTION Installation
WARNING: This page is about a different car, the 2023 RAM 1500 Classic. However, it is still accessible from the selected car via links, so may be relevant.
- Position the Global Telematics Box Module (TBM2) (1) to the instrument panel. Gently press down on the instrument panel (2) to clear the TBM2 bracket into the instrument panel.
- Slide the TBM2 (1) into the instrument panel.
- Rotate the TBM2 counterclockwise to position the TBM2 brackets to the topside of the TBM2.
- Connect the wire harness connectors to the TBM2.
- Install the TBM2 brackets to the instrument panel.
- Install the screws (2) securing the TBM2 (3) to the instrument panel and tighten securely.
- Install the Security Gateway module (SGW). Refer to MODULE, SECURITY GATEWAY (SGW), INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.