Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023DURANGO R/T PREMIUM, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 40 (6.2L - DTCS P0153 TO P023C)
2023 Dodge and Ram Durango R/T Premium, AWD
Section 40 (6.2L - DTCS P0153 To P023C)
2023 Dodge and Ram Durango R/T Premium, AWDSECTION Section 40 (6.2L - DTCS P0153 To P023C)
WARNING: This page is about a different variant/trim than selected.
- DTC Troubleshooting
- P0153-O2 Sensor 2/1 Slow Response
- P0155-O2 Sensor 2/1 Heater Performance
- P0157-O2 Sensor 2/2 Circuit Low
- P0158-O2 Sensor 2/2 Circuit High
- P0159-O2 Sensor 2/2 Slow Response
- P0160-O2 Sensor 2/2 No Activity Detected
- P0161-O2 Sensor 2/2 Heater Performance
- P0171-Fuel System 1/1 Lean
- P0172-Fuel System 1/1 Rich
- P0174-Fuel System 2/1 Lean
- P0175-Fuel System 2/1 Rich
- P018C-Fuel Pressure Sensor Circuit Low
- P018D-Fuel Pressure Sensor Circuit High
- P0196-Engine Oil Temperature Sensor Performance
- P0197-Engine Oil Temperature Sensor Circuit Low
- P0198-Engine Oil Temperature Sensor Circuit High
- P0201-00-Fuel Injector 1 Circuit Open
- Functional Description-Fuel Injectors
- Technical Data-Fuel Injectors
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Injector
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Diagnostic Test-Testing The Entire Fuel Injector Circuitry Using A Lab Scope (Preferred Method):
- Diagnostic Test-Testing A Fuel Injector Using A DVOM
- Powertrain Verification Test
- P0202-00-Fuel Injector 2 Circuit Open
- Notes
- Functional Description-Fuel Injectors
- Technical Data-Fuel Injectors
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Injector
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Diagnostic Test-Testing The Entire Fuel Injector Circuitry Using A Lab Scope (Preferred Method):
- Diagnostic Test-Testing A Fuel Injector Using A DVOM
- Powertrain Verification Test
- P0203-00-Fuel Injector 3 Circuit Open
- Notes
- Functional Description-Fuel Injectors
- Technical Data-Fuel Injectors
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Injector
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Diagnostic Test-Testing The Entire Fuel Injector Circuitry Using A Lab Scope (Preferred Method):
- Diagnostic Test-Testing A Fuel Injector Using A DVOM
- Powertrain Verification Test
- P0204-00-Fuel Injector 4 Circuit Open
- Notes
- Functional Description-Fuel Injectors
- Technical Data-Fuel Injectors
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Injector
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Diagnostic Test-Testing The Entire Fuel Injector Circuitry Using A Lab Scope (Preferred Method):
- Diagnostic Test-Testing A Fuel Injector Using A DVOM
- Powertrain Verification Test
- P0205-00-Fuel Injector 5 Circuit Open
- Notes
- Functional Description-Fuel Injectors
- Technical Data-Fuel Injectors
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Injector
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Diagnostic Test-Testing The Entire Fuel Injector Circuitry Using A Lab Scope (Preferred Method):
- Diagnostic Test-Testing A Fuel Injector Using A DVOM
- Powertrain Verification Test
- P0206-00-Fuel Injector 6 Circuit Open
- Notes
- Functional Description-Fuel Injectors
- Technical Data-Fuel Injectors
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Injector
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Diagnostic Test-Testing The Entire Fuel Injector Circuitry Using A Lab Scope (Preferred Method):
- Diagnostic Test-Testing A Fuel Injector Using A DVOM
- Powertrain Verification Test
- P0207-Fuel Injector 7 Circuit/Open
- Notes
- Functional Description-Fuel Injectors
- Technical Data-Fuel Injectors
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Injector
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Diagnostic Test-Testing The Entire Fuel Injector Circuitry Using A Lab Scope (Preferred Method):
- Diagnostic Test-Testing A Fuel Injector Using A DVOM
- Powertrain Verification Test
- P0208-Fuel Injector 8 Circuit/Open
- Notes
- Functional Description-Fuel Injectors
- Technical Data-Fuel Injectors
- When Monitored
- Set Condition
- Default Action
- Possible Causes
- Diagnostic Overview-Fuel Injector
- Check For An Active Or Intermittent Condition
- Preliminary Diagnostic Checks
- Diagnostic Test-Testing The Entire Fuel Injector Circuitry Using A Lab Scope (Preferred Method):
- Diagnostic Test-Testing A Fuel Injector Using A DVOM
- Powertrain Verification Test
- P0221-Throttle Position Sensor 2 Circuit Performance
- P0222-Throttle Position Sensor 2 Circuit Low
- P0223-Throttle Position Sensor 2 Circuit High
- P023A-Charge Air Cooler Coolant Pump Control Circuit/Open
- P023B-Charge Air Cooler Coolant Pump Control Circuit Low
- P023C-Charge Air Cooler Coolant Pump Control Circuit High
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.