Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2013JOURNEY CREW, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICES(PASSENGER DOOR MODULE (PDM) (DMFL/R) - ELECTRICAL DIAGNOSTICS)
2013 Dodge and Ram Journey Crew, AWD
(Passenger Door Module (PDM) (DMFL/R) - Electrical Diagnostics)
2013 Dodge and Ram Journey Crew, AWDSECTION (Passenger Door Module (PDM) (DMFL/R) - Electrical Diagnostics)
- Diagnostic Code Index
- DTC Troubleshooting
- B1751-11-Courtesy Lamp Control-Circuit Short To Ground
- B1751-15-Courtesy Lamp Control-Circuit Short To Battery Or Open
- B18BA-11 Window Control-Circuit Short To Ground
- B18BA-12-Window Control-Circuit Short To Battery
- B18BA-13-Window Control-Circuit Open
- B18E6-2A-Window Switch - Stuck
- B1DD0-11-Mirror Heater Control-Circuit Short To Ground
- B1DD0-15-Mirror Heater Control-Circuit Short To Battery Or Open
- B1F02-11-Mirror Vertical Motor Control-Circuit Short To Ground
- B1F02-12-Mirror Vertical Motor Control-Circuit Short To Battery
- B1F02-13 Mirror Vertical Motor Control-Circuit Open
- B1F03-11-Mirror Horizontal Motor Control-Circuit Short To Ground
- B1F03-12-Mirror Horizontal Motor Control-Circuit Short To Battery
- B1F03-13-Mirror Horizontal Motor Control-Circuit Open
- B1F04-11-Mirror Fold Control-Circuit Short To Ground
- B1F04-15-Mirror Fold Control-Circuit Short To Battery Or Open
- B210C-16-Battery Voltage Input-Circuit Voltage Below Threshold
- B210C-17-Battery Voltage Input-Circuit Voltage Above Threshold
- B21DD-84 System Voltage-Signal Below Allowable Range
- B21DD-85 System Voltage-Signal Above Allowable Range
- B224F-54-Door Module Internal-Missing Calibration
- B224F-96-Door Module Internal-Component Internal Failure
- B25AF-2A-Door Lock/Unlock Switch-Stuck
- B25B0-31-Window Position Sensor-No Signal
- B25B1-11-Window Position Sensor Power Supply-Circuit Short To Ground
- B285E-11-Window Switch Backlighting-Circuit Short To Ground
- B2860-11-Door Ambient Light Control-Circuit Short To Ground
- B2860-15-Door Ambient Light Control-Circuit Short To Battery Or Open
- U0010-00-Can Interior Bus
- U0018-00 Can Interior Bus (-) Shorted To Bus (+)
- U0140-00-Lost Communication With Body Control Module
- U0164-00-Lost Communication With HVAC Control Module
- U0199-00-Lost Communication With Driver Door Module
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.