Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2011JOURNEY R/T, AWDREPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYFUEL SYSTEMFUEL DELIVERY, GASTUBE(S), FUELREMOVAL2.4L
2011 Dodge and Ram Journey R/T, AWD
Tube(S), Fuel: Removal: 2.4L
2011 Dodge and Ram Journey R/T, AWDSECTION 2.4L
| 1 - Fuel Line |
| 2 - Quick disconnect at body mounted fuel line bundle |
| 3 - Quick disconnect at fuel rail |
WARNING:
The fuel system is under constant pressure even with engine OFF. Until the fuel pressure has been properly relieved from the system, do not attempt to open the fuel system.
- Release the fuel system pressure. Refer to FUEL SYSTEM PRESSURE RELEASE PROCEDURE .
- Disconnect and isolate negative battery cable.
- Remove engine cover.
- Disconnect the fuel line quick connect fitting (2) from the body mounted fuel line bundle. Refer to STANDARD PROCEDURE .
- Disconnect the fuel line quick connect fitting (3) from the fuel rail. Refer to STANDARD PROCEDURE .
- Disengage fuel line retainer from valve cover mounting stud and remove fuel line (1) from vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.