SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM1999DAKOTA SLT, 2D PICKUP, 3.9 X, 4WD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESPECIFICATIONSENGINE CONTROLS - SERVICE & ADJUSTMENT SPECIFICATIONSQUICK-SERVICESERVICE INTERVALS & SPECIFICATIONSREPLACEMENT INTERVALS (DURANGO)
1999 Dodge and Ram Dakota SLT, 2D Pickup, 3.9 X, 4WD, Standard

Replacement Intervals (DURANGO)

1999 Dodge and Ram Dakota SLT, 2D Pickup, 3.9 X, 4WD, StandardSECTION Replacement Intervals (DURANGO)
REPLACEMENT INTERVALS (DURANGO) (1)

Component Months Miles
Air Filter
Normal Service 24 30,000
Severe Service (2) (3) 15,000
Coolant (4) (4)
Engine Oil
Normal Service 6 7500
Severe Service (2) 3000
Engine Oil Filter
Normal Service 12 15,000
Severe Service (2) 6000
PCV Valve (5)
Normal Service 48 60,000
Severe Service (2) 30,000
Spark Plugs
Normal Service 24 30,000
Severe Service (2) 30,000
Spark Plug Wires
Normal Service 48 60,000
Severe Service (2) 60,000
Automatic Transmission Fluid, Filter & Band Adjustment
Normal Service 30 37,500
Severe Service (2) 12,000
Transfer Case Fluid (4WD)
Normal Service 30 37,500
Severe Service (2) 36,000
Front Differential Fluid (4WD) (6)
Severe Service (2) 12,000
Rear Differential Fluid (6)
Severe Service (2) 12,000
Repack Front Wheel Bearings
Normal Service 18 22,500
Severe Service (2) 21,000
(1) Different interval may be required for normal and severe service. Severe service is described as long periods of engine idling, frequent short trip operation of less than 5 miles, trailer towing, off-highway operation, snow removal operation, or operating in dusty or excessively hot conditions.
(2) Monthly interval is not available from manufacturer.
(3) Inspect air filter every 15,000 miles and replace as necessary. Replace at 30,000 miles unless previously replaced during inspection.
(4) Replace coolant at 45,000 miles or 36 months whichever occurs first. Replace coolant at 36 months regardless of mileage. After first coolant change, replace coolant every 24 months or 30,000 miles thereafter.
(5) Inspect at scheduled interval and replace as necessary.
(6) Normal service interval is not available from manufacturer. Manufacturer lists service schedule only under severe service conditions.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.